Skip to main content

High Speed Series

Hi-Speed, High-Density Hyperboloid Modular Interconnects

This modular IEH connector is a shielded, high-density, high-speed interconnect that employs the mission critical capabilities of the hyperboloid contact.

HKC (cPCI Series)

  • Interchangeable with COTS board layout, but with Hyperboloid Contact System
  • 2mm Footprint of cPCI PICMG 2.0
  • LCP Insulator Meets Outgassing Requirements
  • Press-fit or Solder tail Terminations

Data Sheets

DATA RATE: Up to 10 Gbps


DIFFERENTIAL INSERTION LOSS: Roughly up to 20 GHz @ ‐0.2 dB


DIFFERENTIAL RETURN LOSS: Roughly up to 20 GHz @ ‐48 dB


FAR END CROSSTALK: Roughly up to 8 GHz @ ‐35 dB


NEAR END CROSSTALK: Roughly up to 8 GHz @ ‐35 dB


SI DATA: 50 OHM SINGLE‐ENDED; 100 OHM DIFFERENTIAL


NOTES:
Results will vary depending on the pin‐out configuration. See factory for results

HKX (VPX-Compatible Series)

  • VITA-46 Platform
  • Data Rates up to 10 Gbps
  • 3U, 6U and Custom Configurations
  • Hyperboloid Contact System Resistant to Fretting
  • Custom Wafer Design for Mixing
  • Differential and Single-ended Circuits
  • Press-fit or Solder tail Terminations
  • Ruggedized Chassis option for 3U

Data Sheets

DATA RATE: Up to 10 Gbps


DIFFERENTIAL INSERTION LOSS: Roughly up to 20 GHz @ ‐0.4 dB


DIFFERENTIAL RETURN LOSS: Roughly up to 20 GHz @ ‐40 dB


SI DATA: 50 OHM SINGLE‐ENDED; 100 OHM DIFFERENTIAL


TIME DOMAIN CROSSTALK AVAILABLEFAR END CROSSTALK

Why Hyperboloid Connectors?

Hyperboloid contacts offer incredible reliability, performance, and endurance.

Hyperboloid Connectors

Find a connector for your needs.

Contact Us

If you don’t see what you’re looking for, call 718.492.4448 or email [email protected]