Hi-Speed, High-Density Hyperboloid Modular Interconnects
The modular Hyperkinetic IEH connector is a shielded, high-density, high-speed interconnect that employs the mission critical capabilities of the hyperboloid contact.
HKC (cPCI Series)
- Interchangeable with COTS board layout, but with Hyperboloid Contact System
- 2mm Footprint of cPCI PICMG 2.0
- LCP Insulator Meets Outgassing Requirements
- Press-fit or Solder tail Terminations
Data Sheets
- Daughter Card Type “A” 110 contacts
- Daughter Card Type “B” 95 – 110 contacts
- Daughter Card Type “AB” 95 – 110 contacts
- Backplane Type “A” 110 contacts
- Backplane Type “B” 95 – 110 contacts
- Backplane Type “AB” 95 – 110 contacts
DATA RATE: Up to 10 Gbps
DIFFERENTIAL INSERTION LOSS: Roughly up to 20 GHz @ ‐0.2 dB
DIFFERENTIAL RETURN LOSS: Roughly up to 20 GHz @ ‐48 dB
FAR END CROSSTALK: Roughly up to 8 GHz @ ‐35 dB
NEAR END CROSSTALK: Roughly up to 8 GHz @ ‐35 dB
SI DATA: 50 OHM SINGLE‐ENDED; 100 OHM DIFFERENTIAL
NOTES:
Results will vary depending on the pin‐out configuration. See factory for results
HKX (VPX-Compatible Series)
- VITA-46 Platform
- Data Rates up to 10 Gbps
- 3U, 6U and Custom Configurations
- Hyperboloid Contact System Resistant to Fretting
- Custom Wafer Design for Mixing
- Differential and Single-ended Circuits
- Press-fit or Solder tail Terminations
- Ruggedized Chassis option for 3U
Data Sheets
- P0 & P1 Daughtercard Connector Dimensions
- P0 & P1 Backplane Connector Dimensions
- 3U Configuration with Shell, Daughtercard and Backplane Connector Dimensions
DATA RATE: Up to 10 Gbps
DIFFERENTIAL INSERTION LOSS: Roughly up to 20 GHz @ ‐0.4 dB
DIFFERENTIAL RETURN LOSS: Roughly up to 20 GHz @ ‐40 dB
SI DATA: 50 OHM SINGLE‐ENDED; 100 OHM DIFFERENTIAL
TIME DOMAIN CROSSTALK AVAILABLEFAR END CROSSTALK
Why Hyperboloid Connectors?
Hyperboloid contacts offer incredible reliability, performance, and endurance.
Contact Us
If you don’t see what you’re looking for, call 718.492.4448 or email [email protected]